page 1 chip general purpose rectifiers formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. ds-121143 2013/05/02 - a 7 fm4001-m thru fm4007-m h1 h1 1 2 2 2 2 3 4 4 4 5 6 6 7 list list................................................................................................. package outline............................................................................... features.......................................................................................... maximum ratings and ................................. rating and characteristic curves........................................................ pinning information........................................................................... marking........................................................................................... suggested solder pad layout............................................................. packing information.......................................................................... reel packing.................................................................................... suggested thermal profiles for soldering processes............................. high reliability test capabilities........................................................... electrical characteristics mechanical data...............................................................................
batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. low profile surface mounted application in order to optimize board space. t high current capability lead-free parts meet environmental standards of mil-std-19500 /228 features ? ? iny plastic smd package. suffix "-h" indicates halogen-free parts, ex. FM4001-MH1-h. . high surge capability. glass passivated chip junction. ? ? ? ? ? ? page 2 formosa ms 1.0a surface mount general purpose rectifiers- 50v-1000v http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. ds-121143 2013/05/02 - a 7 chip general purpose rectifiers note 1. measured at 1 mhz and applied reverse voltage of 4.0 vdc maximum ratings and electrical characteristics (at t =25 a o c unless otherwise noted) symbols maximum repetitive peak reverse voltage parameter maximum rms voltage peak forward surge current 8.3ms single half sine-wave(jedec method) maximum dc blocking voltage maximum average forward rectified current i o v dc v rrm i fsm v rms maximum forward voltage at i =1.0a f v f i r maximum dc reverse current t =25 c at rated dc blocking voltage t =125 c j j c j typical junction capacitance (note 1) t stg t j operating junction temperature range storage temperature range 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 1.0 25 5.0 50 1.1 15 -55 to +150 -65 to +175 unit v v v a a v ua ua pf c c FM4001-MH1 fm4002-mh1 fm4003-mh1 fm4004-mh1 fm4005-mh1 fm4006-mh1 fm4007-mh1 mechanical data epoxy : ul94-v0 rated flame retardant case : molded plastic, terminals :plated terminals, solderable per mil-std-750, method 2026 polarity : indicated by cathode band mounting position : any ? ? ? ? ? ? sod-123h1 weight : approximated 0.0103 gram fm4001-m thru fm4007-m h1 h1 r ja typical thermal resistance junction to ambient typical thermal resistance junction to case 65 40 c/w r jc package outline dimensions in inches and (millimeters) sod-123h1 0.031(0.8) typ. 0.146(3.7) 0.130(3.3) 0.004(0.1) typ. 0.031(0.8) typ. 0.012(0.3) typ. 0.071(1.8) 0.056(1.4) 0.040(1.0) 0.024(0.6) c/w
page 3 rating and characteristic curves (FM4001-MH1 thru fm4007-mh1) fig.2-typical forward current derating curve average for ward current ,(a) fig.4-maximum non-repetitive forward surge current 0.2 0 0.4 0.6 0.8 1.0 1.2 lead temperature ( c) 0.1 1.0 .01 10 50 fig.1-typical forward characteristics instantaneous for ward current ,(a) forward voltage,(v) pulse width 300us 1% duty cycle .6 .7 .8 .9 1.0 1.1 1.2 1.3 3.0 t =25 c j fig.5-typical junction capacitance reverse voltage,(v) junction cap acitance,(pf) 35 30 25 20 15 10 5 0 .01 .05 .1 .5 1 5 10 50 100 peak for waard surge current ,(a) 0 20 40 60 80 100 120 140 160 180 200 http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. 10 0 20 30 40 50 number of cycles at 60hz 110 5 50 100 t =25 c j 8.3ms single half sine wave jedec method ds-121143 2013/05/02 - a 7 .1 1.0 10 100 fig.3 - typical reverse characteristics reverse leakage current , ( a) percentage rated peak reverse voltage 0 20 40 60 80 100 120 140 .01 t =125 c j t =25 c j
pinning information 1 2 2 1 pin1 cathode pin2 anode pin simplified outline symbol marking suggested solder pad layout dimensions in inches and (millimeters) a c b b 0.051 (1.30) a 0.071 (1.80) c 0.067 (1.70) package sod-123h1 page 4 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. ds-121143 2013/05/02 - a 7 chip general purpose rectifiers fm4001-m thru fm4007-m h1 h1 marking type number marking code FM4001-MH1 a1 fm4002-mh1 a2 fm4003-mh1 a3 fm4004-mh1 a4 fm4005-mh1 a5 fm4006-mh1 a6 fm4007-mh1 a7
packing information item tolerance sod-123h1 carrier width carrier length carrier depth sprocket hole 13" reel outside diameter 7" reel outside diameter 13" reel inner diameter 7" reel inner diameter feed hole diameter sprocket hole position punch hole position punch hole pitch sprocket hole pitch embossment center reel width overall tape thickness tape width p 0 p 1 e b c d f t w p a d d d 1 d 1 d 2 w 1 symbol 0.1 0.1 0.1 min min 0.5 0.1 0.3 1.0 0.1 0.1 0.1 0.1 0.1 0.1 2.0 2.0 unit:mm 1.50 - 178.00 - 62.00 13.00 1.75 3.50 4.00 4.00 2.00 0.23 8.00 11.40 p 0 p 1 e b d f w p a d d 1 d 2 w 1 c t page 5 note:devices are packed in accor dance with eia standar rs-481-a and specifications listed above. 2.00 3.85 1.10 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. ds-121143 2013/05/02 - a 7 chip general purpose rectifiers fm4001-m thru fm4007-m h1 h1
page 6 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. sod-123h1 7" 3,000 4.0 30,000 183*123*183 178 382*257*387 240,000 9.0 package reel size reel component spacing box inner box reel dia, carton size carton approx. gross weight (kg) (pcs) (m/m) (m/m) (m/m) (pcs) (m/m) (pcs) reel packing profile feature soldering condition average ramp-up rate(t to t ) <3 /sec preheat -temperature min(tsmin) 150 -temperature max(tsmax) 200 -time(min to max)(t ) 60~120sec tsmax to t -ramp-uprate <3 /sec time maintained above: -temperature(t ) 217 -time(t ) 60~260sec peak temperature(t ) 255 0/ 5 time within 5 of actual peak temperature(t ) ramp-down rate <6 /sec time 25 to peak temperature <6minutes lp s l l l p p o o o o o oo o o o c c c c c c- + c c c c 3.reflow soldering 10~30sec 1.storage environment: temperature=5 ~40 humidity=55%25% 2.reflow soldering of surface-mount devices oo cc suggested thermal profiles for soldering processes critical zone tl to tp critical zone tl to tp tl tsmax tsmin ramp-up tp ts preheat t25 c to peak o time 25 tl tp ramp-down temperature ds-121143 2013/05/02 - a 7 chip general purpose rectifiers fm4001-m thru fm4007-m h1 h1
page 7 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. ds-121143 2013/05/02 - a 7 chip general purpose rectifiers fm4001-m thru fm4007-m h1 h1 1. solder resistance 2. solderability 3. high temperature reverse bias 4. forward operation life 5. intermittent operation life 6. pressure cooker 7. temperature cycling 8. forward surge 9. humidity 10. high temperature storage life at 260 5 for 10 2sec. at 245 5 for 5 sec. v =80% rate at t =150 for 168 hrs. rated average rectifier current at t =25 for 500hrs. t = 25 c, i = i on state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. 15p at t =121 for 4 hrs. -55 to +125 dwelled for 30 min. and transferred for 5min. total 10 cycles. 8.3ms single half sine-wave , one surge. at t =85 , rh=85% for 1000hrs. at 175 for 1000 hrs. c c c c c cc c c o o o o o oo o o rj a afo sig a a o mil-std-750d method-2031 mil-std-202f method-208 mil-std-750d method-1038 mil-std-750d method-1027 mil-std-750d method-1036 mil-std-750d method-1051 mil-std-750d method-4066-2 mil-std-750d method-1021 mil-std-750d method-1031 jesd22-a102 item test conditions reference high reliability test capabilities
|
